How To Set Up ScreenCloud on an IAdea Signboard

Avatar
by Abner Olivieri
Follow

IAdea’s Android-powered XDS line of signboards has a great range of touch and non-touch options in various sizes and configurations, ideal for interactive displays. They come with great port and mount options, LED lightbars and IAdeaCare for remote device management.

In this article, we will cover how to set up your IAdea signboard with ScreenCloud. Follow the checklist below to help you get started.

 

Section I: If necessary, factory reset your device

1. Manual Factory Reset

2. Factory Reset With System Settings

 

Section II: How To Set Up Your IAdea Signboard

1. System Settings

 

Section III: How To Install the ScreenCloud Android Player on your IAdea device

1. Installation Using the ScreenCloud Release Page

2. USB Stick or SD Card Installation

 

Section IV: IAdea Settings

1. AppStart Settings

2. FailSafe Settings

 

Section I: If Necessary, Factory Reset Your Device

Factory resetting your device restores it to its original out-of-the-box state by clearing data and settings. This section is not relevant if you just received a new unopened IAdea device, but if you have a device that has previously been used that you want to reset, there are two ways to factory reset it, either with the manual reset button or selecting the factory reset option in system settings.

Here's how:

1. Manual Factory Reset 

1.1. Disconnect the device from it's power source.

1.2. Locate the reset button on the back of the device.

Screen_Shot_2562-07-31_at_14.22.44__1_.png

1.3. Insert and hold a push-pin into the 'Reset' button, while reattaching the AC power cord (to start the reset).

1.4. Wait until the LED light starts to blink orange, then release the button and wait for the system to initialize.

 

2. Factory Reset With System Settings

2.1. Open your device to the 'Basic Settings' page.

2.2. Click on 'Advanced' in the top right corner.

2.3. Click on 'System'.

2.4. Click on the 'Factory default' button.

Screen_Shot_2562-07-31_at_12.09.11.png2.5. Select 'OK', which will start the reset.

Screen_Shot_2562-07-31_at_12.13.49.png 

 

Section II: How To Set Up Your IAdea Signboard

This section will explain how to set up your IAdea signboard's basic settings. Keep in mind that IAdea has a wide range of signboard models, and not all package contents are the same, so some parts of the process may differ for you slightly. For complete documentation, visit IAdea's help center here.

1. System Settings

1.1. Inset the power cord, the device should start up immediately.

1.2. After the device starts up, you should see the 'Basic Settings' page. Using a mouse or touch, select 'Advanced' to enter advanced settings.

1.3. Select 'Network' and configure your internet settings either through a Wireless LAN or Ethernet.

1.4. Next, select 'Display/Sound' and configure any display or sound settings.

1.5. To ensure higher security, it is recommended to set a password, so select 'Access', then 'Security', enter a password and then select 'Set'.

1.6. Next, select 'Scheduling', then 'Time and date' and configure your time zone and other settings.

  

Section III: How To Install the ScreenCloud Android Player on your IAdea device

There are three different approaches to install the ScreenCloud Android player on your IAdea device. Either you can download the file from our ScreenCloud release page here, or side load the app onto the device using an SD card or USB stick.

1. Installation Using the ScreenCloud Release Page

1.1. To install the ScreenCloud Android player, enter Desktop Mode to find your local browser.
1.2. To enter Desktop Mode, first, select 'Advanced' to enter advanced settings, then using a mouse or touch capability, tap three times in the bottom right corner of the screen like so. This is the same process across all IAdea devices.

*** It is important to note that you can only enter into desktop mode from this screen ***

Screen_Shot_2562-07-30_at_15.44.47.png1.3. By tapping the screen in the bottom right corner three times, it will bring you to Desktop Mode.

Screenshot_20190730-054611.png

1.4. Click on your Chrome Browser on the status bar, and enter the URL https://release.screen.cloud as seen below.

Screen_Shot_2562-07-30_at_17.06.40__1_.png

1.5. Select and download the Android version. After enabling the download, locate recent downloads by swiping down the top-left corner of the screen, click on the APK file and follow the steps to install it.

Screen_Shot_2562-07-30_at_17.10.31__1_.png

Caution! A new device may disable the ability to download from unknown sources. If this is the case enter Desktop Mode (see 'Installation Using the ScreenCloud Release Page', step 1.2), then open 'Settings', go to 'Security' and enable 'Unknown sources'.

 

2. USB Stick or SD Card Installation

2.1. To install the ScreenCloud Android player via USB disk or SD card, on your PC, download the latest version of the app from ScreenCloud Studio's release page here https://release.screen.cloud and copy the APK file to a USB stick or SD card.

2.2. Next, insert the USB stick or SD card in the designated slot in the back of the IAdea device. Note, the USB stick must be fully fitted into the slot for the tablet to recognize it's there.

2.3. To start the installation process, first, enter Desktop Mode, (see 'Installation Using the ScreenCloud Release Page', step 1.2), then open the app drawer and select 'File Manager'.

Screen_Shot_2562-07-31_at_15.12.07__1_.png

2.4. After entering file manager you will see the screen below. In order to access your USB or SD card, you must switch the from internal storage to SD storage as seen below:

Screen_Shot_2562-07-31_at_15.20.14.png

Note that if your SD card or USB stick is not properly inserted, the option will not be displayed. Also note, USB sticks often simply show up as SD cards.

Screen_Shot_2562-07-31_at_15.22.45.png

Screen_Shot_2562-07-31_at_15.26.23.png

2.5. Select the app file and follow the steps to install it.

Screenshot_20190731-035630.png

Once the ScreenCloud Android player is installed, you can pair your screen with your ScreenCloud account.

wKlRvfyQyWMzUfDMnOhv.png

 

Section IV: IAdea Settings 

1. AppStart Settings

By setting AppStart settings, you can set an app to automatically launch when the device boots up. For the complete documentation, please visit IAdea's help article about AppStart here.

1.1. To set AppStart settings, enter the 'Basic Settings' page, then select 'Advanced' to enter advanced settings, then select 'Content', then 'AppStart'.

1.2. Enter the following information below:

Do not enter a URL, instead select 'Advanced' and enter the following.

Package name: io.screencloud.player

Class name: io.screencloud.player.SmilActivity

Action: android.intent.action.VIEW

Type: (Leave blank)

You can also enable all the options below, including 'Trust', 'Desktop mode' and 'Ignore certificate errors'.

2. FailSafe Settings

By setting FailSafe settings, the system will attempt to recover and restart the app in the event that your device crashes. For the complete documentation, please visit IAdea's help article about FailSafe here.

2.1. To set FailSafe settings, enter the 'Basic Settings' page, then select 'Advanced' to enter advanced settings, then select 'Content', then 'FailSafe'.

2.2. Enter the following information below:

Do not enter a URL, instead select 'Advanced' and enter the following.

Package name: io.screencloud.player

Class name: io.screencloud.player.SmilActivity

Action: android.intent.action.VIEW

Type: (Leave blank)

You can also enable all the options below, including 'Trust', 'Desktop mode' and 'Ignore certificate errors'.

 

If you have any additional questions on how to set up an IAdea signboard with ScreenCloud, or any other questions or feedback about ScreenCloud, feel free to reach out to our support team at support@screencloud.com or give us a call at our toll-free support line at +18885575335.

 

Comments

0 comments
Please sign in to leave a comment.