macOS Player

Avatar
by Santino Scibelli
Follow

In this guide, we’ll walk you through how to set up ScreenCloud’s digital signage software using a  macOS device, plus a step-by-step guide to adding rich digital content in mere minutes.

Table of Contents:

1. How to use a macOS device as a screen

2. How to reset the pairing code

3. How to toggle view from full-screen to a smaller screen

 

1. How to use a macOS device as a screen

1.1. Download the ScreenCloud Signage Player app for macOS.

1.2. Launch the app.

1.3. Make a note of the pairing code - this is the code you need to enter into your "Screens" section of your ScreenCloud account. 

pairing-code.png

1.4. The ScreenCloud Signage Player will now show a pairing code.

 

2. How to reset the pairing code

If you want to pair your macOS device with a different ScreenCloud Signage account, or if you need to reset the pairing for any other reason:

2.1. Hover over the player, and observe two icons appear at the top right of the player.

2.2. Click on the icon that looks like a set of three slider controls.

2.3. Click on the 'Reset pairing' button.

2.4. This will reset the player pairing, and you can re-pair it following the instructions above.

Screen_Shot_2017-04-20_at_7.16.03_PM.png

  • At the top right, you can see the icons you need to control the ScreenCloud Signage player for macOS. 

Screen_Shot_2017-04-20_at_7.16.14_PM.png

  • Click on the 'Reset pairing' button.

 

3. How to toggle view from full-screen to a smaller screen

3.1. Hover over the player, and observe two icons appear at the top right of the player.

3.2. Click the arrows pointing inwards or outwards, this switches the ScreenCloud Player for macOS in full-screen and smaller screen mode.

Screen_Shot_2017-04-20_at_7.16.03_PM.png

 

If you have any additional questions on the macOS Player, or any other questions or feedback about ScreenCloud, feel free to reach out to our support team at support@screencloud.io or give us a call at our toll-free support line at +18885575335.

Comments

0 comments
Please sign in to leave a comment.